News

Home > News > Content

Fiber Optic Transceivers Reliability

Edit:Aifon Technology Co.,Ltd      Date:Jul 24, 2017

Optical fiber transceiver, Fiber Optic Transceivers also known as photoelectric converter, is a short distance twisted pair electrical signals and long distance optical signal interchangeable Ethernet transmission media conversion unit. The difference in viewing angle gives a different understanding of fiber optic transceivers, Fiber Optic Transceivers such as 10M, 100M fiber optic transceivers, Fiber Optic Transceivers 10 / 100M adaptive fiber optic transceivers and 1000M fiber optic transceivers at transmission rates; Fiber optic transceivers operating in the physical layer and fiber optic transceivers operating at the data link layer; Fiber Optic Transceivers if the desktop (stand-alone) fiber optic transceivers and rack-mounted fiber optic transceivers are viewed from a structural point of view; Fiber Optic Transceivers There are multi-mode fiber optic transceivers and single-mode fiber optic transceivers two called.

There are also single-fiber fiber transceivers and dual-fiber fiber transceivers, built-in power supply fiber optic transceivers and external power fiber transceivers and managed fiber optic transceivers and off-managed fiber optic transceivers. The fiber-optic transceivers break the 100-meter limit on Ethernet cabling, Fiber Optic Transceivers rely on high-performance switching chips and high-capacity caches, while providing true non-blocking transport switching performance while providing balanced traffic, Fiber Optic Transceivers isolation conflicts, Fiber Optic Transceivers and Detection error and other functions to ensure that the data transmission of high security and stability.

1, fiber optic transceivers to 100BASE-TX devices (switches, hubs) connection:

Confirm that the length of the twisted pair is not more than 100 meters long;

Connect one end of the twisted pair to the RJ-45 port (Uplink) of the fiber transceiver and the RJ-45 port (common port) to the 100BASE-TX (switch, hub).

2, fiber optic transceivers to 100BASE-TX equipment (network card) connection:

Confirm that the length of the twisted pair is not more than 100 meters long;

Connect one end of the twisted pair to the RJ-45 port (100BASE-TX port) of the fiber optic transceiver and the other end to the RJ-45 port of the network card.

3, fiber optic transceivers to 100BASE-FX connection:

Make sure that the fiber length does not exceed the range of distance the device can provide;

One end of the fiber is connected to the SC / ST connector of the fiber optic transceiver and the other end is connected to the SC / ST connector of the 100BASE-FX device.

Also need to add is that many users in the use of fiber optic transceivers that: as long as the length of fiber in single-mode fiber or multi-mode fiber can support the maximum distance can be used normally. In fact, this is a wrong understanding, this understanding only in the connected devices are full-duplex equipment is correct, when there are half-duplex equipment, the optical fiber transmission distance there is a certain limit.

Fiber optic transceivers as a regional network connector device, the main task is how to make a good two-way data seamlessly. It must consider its compatibility with the surrounding environment with each other, and the stability of their products, reliability


Copyright © Aifon Technology Co.,Ltd  E-mail:sales@aifontech.com
TEL:+86-755-21535969  FAX:+86-755-26700593

Aifon Technology Co.,Ltd