News

Home > News > Content

Fiber Optic Transceivers Called The Law

Edit:Aifon Technology Co.,Ltd      Date:Aug 01, 2017

Optical fiber transceiver, also known as photoelectric converter, Fiber Optic Transceivers is a short distance twisted pair electrical signals and long distance optical signal interchangeable Ethernet transmission media conversion unit. The difference in viewing angle gives a different understanding of fiber optic transceivers, Fiber Optic Transceivers such as 10M, 100M fiber optic transceivers, Fiber Optic Transceivers 10 / 100M adaptive fiber optic transceivers and 1000M fiber optic transceivers at transmission rates; Fiber optic transceivers operating in the physical layer and fiber optic transceivers operating at the data link layer; if the desktop (stand-alone) fiber optic transceivers and rack-mounted fiber optic transceivers are viewed from a structural point of view; Fiber Optic Transceivers There are multi-mode fiber optic transceivers and single-mode fiber optic transceivers called two.

There are also single-fiber fiber transceivers and dual-fiber fiber transceivers, built-in power supply fiber optic transceivers and external power fiber transceivers and managed fiber optic transceivers and off-managed fiber optic transceivers. The fiber-optic transceivers break the 100-meter limit on Ethernet cabling, rely on high-performance switching chips and high-capacity caches, Fiber Optic Transceivers while providing true non-blocking transport switching performance while providing balanced traffic, isolation conflicts, Fiber Optic Transceivers and Detection error and other functions to ensure that the data transmission of high security and stability.

When using fiber optic transceivers to connect different devices, you must pay attention to the use of different ports.

1, fiber optic transceivers to 100BASE-TX devices (switches, hubs) connection:

Confirm that the length of the twisted pair is not more than 100 meters long;

Connect one end of the twisted pair to the RJ-45 port (Uplink) of the fiber transceiver and the RJ-45 port (common port) to the 100BASE-TX (switch, hub).

2, fiber optic transceivers to 100BASE-TX equipment (network card) connection:

Confirm that the length of the twisted pair is not more than 100 meters long;

Connect one end of the twisted pair to the RJ-45 port (100BASE-TX port) of the fiber optic transceiver and the other end to the RJ-45 port of the network card.

3, fiber optic transceivers to 100BASE-FX connection:

Make sure that the fiber length does not exceed the range of distance the device can provide;

One end of the fiber is connected to the SC / ST connector of the fiber optic transceiver and the other end is connected to the SC / ST connector of the 100BASE-FX device.

Also need to add is that many users in the use of fiber optic transceivers that: as long as the length of fiber in single-mode fiber or multi-mode fiber can support the maximum distance can be used normally. In fact, this is a wrong understanding, this understanding only in the connected devices are full-duplex equipment is correct, when there are half-duplex equipment, the optical fiber transmission distance there is a certain limit.

Fiber optic transceivers, Fiber Optic Transceivers is a short distance twisted pair electrical signals and long distance optical signal interchangeable Ethernet transmission media conversion unit, in many places also known as the photoelectric converter (Fiber Converter). Fiber Optic Transceivers The product is generally used in the actual network environment where the Ethernet cable can not be covered and must be used to extend the transmission distance, Fiber Optic Transceivers and is usually located in the access layer application of the broadband metro network; Fiber Optic Transceivers while helping to connect the last mile of the fiber to the metro Network and more outside the network also played a huge role.


Copyright © Aifon Technology Co.,Ltd  E-mail:sales@aifontech.com
TEL:+86-755-21535969  FAX:+86-755-26700593

Aifon Technology Co.,Ltd